This is a Survivor smog system for a small block 1968 Corvette. I was told that it was taken off soon after delivery and it shows that it was properly stored. All the parts are Original and in great condition. I only cleaned the parts. All the finish and paint is original with No touch ups or restoration. The pump still operates smoothly and pumps air; was Not opened up.
Original pump with the pressure relief on top with original black insert. Original black paint on back. Original diverter valve 24765 with black attaching bracket, 3917648 hose, 1 1/4" DCM (Wittek) hose clamps, DH stamp and Schmelzer muffler. Original 3917690 LI GM and 3917688 LD GM Hoses with no wear on the stencils and white stripe vacuum hose. Original 4 x 1 1/16" Wittek hose clamps dated 2/68 (2nd qtr of 1968) with nice original plating. Original 3917234 pulley with scalloped back, original bolts and paint. Original white fan and pulley spacer, no rusty. Original tubes with no bends or damage, all nice nuts and with most all of the original finish. Original 5361992 check valves with nice original yellow dichromate finish. Original orange pump bracket, bolt and nut; original black adjuster bracket and bolt. Both in good condition with minimal paint loss.
This is ready to install; needs no work.
I can provide more pictures if needed. Email
[email protected] or text/call Len at 908-418-2684. No problem shipping. Located in Bethlehem, PA 18020.