View Single Post
  #35  
Old 12-11-2023, 01:09 PM
A12pilot's Avatar
A12pilot A12pilot is offline
Yenko Advertising Member
 
Join Date: Nov 2014
Location: DFW
Posts: 2,793
Thanks: 0
Thanked 5,285 Times in 1,227 Posts
Default

Run out? Is that Wisconsineese, Tim? Perhaps too much cheese? I just bolted it up and it worked out great! Had to mash it in gear a couple times, and it made a weird whiny sound, but it seemed to settle down after a while. You know, things just have to seat with new parts n' junk.

Kidding of course. Perhaps they changed to tooling on the bellhousing since mine was pretty close. Still needed to rotate a little but the directions had it to be no more than .005 but mine aligned at .007, so it was pretty close and not much needed to correct it to .003 eventually. Unless I measured wrong and it was .3 since I'm not exactly great at math. That would explain all that noise!

Best upgrade ever!

Cheers
Dave
Reply With Quote
The Following 5 Users Say Thank You to A12pilot For This Useful Post:
69M22Z (12-11-2023), big gear head (12-11-2023), dykstra (12-11-2023), napa68 (12-11-2023), olredalert (12-11-2023)