View Single Post
  #5  
Old 09-25-2022, 04:44 PM
njsteve's Avatar
njsteve njsteve is online now
Yenko Contributing Member
 
Join Date: Nov 2003
Location: NJUSA
Posts: 8,324
Thanks: 8
Thanked 2,634 Times in 817 Posts
Default

Quote:
Originally Posted by KingKoser06 View Post
I Only realized it unbolted after I read the manual and it was already unloaded. The “sniffer” sometimes works…. Most times not. Though it’s not really necessary for my purposes

What I’d really like to get is one of those distributor machines that you set your curve on.
If you pull off the giant back panel you will see all the hoses that are involved with the siffer system. You can carefully replace each one with clear fuel line hose. There is one specific hose that has a restricted oriface built in. You can actually reproduce it with the clear fuel line by sliding a similar thickness piece of copper wire inside a section of plastic hose and the melting the hose and flattening it. Once it cools, pull out the metal wire and the oriface is successfully reproduced.
Reply With Quote
The Following 2 Users Say Thank You to njsteve For This Useful Post:
KingKoser06 (09-27-2022), markinnaples (10-05-2022)