View Single Post
  #7  
Old 12-11-2021, 06:01 PM
jeffschevelle jeffschevelle is offline
Yenko Contributing Member
 
Join Date: Oct 2008
Location: Concord, NC
Posts: 404
Thanks: 3
Thanked 876 Times in 205 Posts
Default

The 3780 beginning part number does not make sense for a 64 or 65 Muncie trans. 3780 correlates to part numbers originally issued in about 1960 or 1961. Numbers of course can continue to be used for years, but since Muncie's did not first exist until 1963 that would not be the case here. For example, the part number listed in the AIM for a 1964 Chevelle Muncie (wide ratio) is 3841435.

So the tag probably does not go with that trans.

You can at least narrow down the maincase to being original to either a 64 or a 65 trans. 64 maincases have a smaller rounded casting boss on the top rear center of the case (where it is drilled and tapped for the hole for the top center tail housing bolt). 65's have a much larger rectangular boss which looks like 66 and later cases.
__________________
Jeff Helms
65 Z16 Survivor
65 Z16 drag car
66 Chevelle L78 unrestored
67 Chevelle L78 unrestored
67 Camaro SS350 Survivor
Reply With Quote