[NorCam]

Got out to spend a few hours working on the car while finishing up the suspension today. Wedges are now installed, trac bars are roughed in on both sides, and I flipped the bases around on the airbags to help clear the rear straps on the Lakewoods. Once that was finished up I installed the driveshaft and bolted the NMW safety loop up through the floor. Since the bolts came up under the seat pan, I drilled the top plate with a hole saw and dropped the washers and nuts down into the cavity to conceal the hardware once the carpet goes back in. I'll load the suspension in the AM and will then make some final adjustments.