One time I laid out the dimensions from the AIM on a piece of paper. I had NOS emblems, but if I followed holes per the AIM, on one side the emblem would angle down, and on the other, it woud angle up. I ended updoing what was suggested above, but I used cereal box cardboard. I used the hole on the "C" as a reference, and then used the cardboard template to mark the other holes. I drilled them undersized, and then filed them as needed with a jewelers file.repeated for the other side.For the Yenko badge, I just faked it, since I'm sure that's what Lynn Yenko did.
|