View Single Post
  #10827  
Old 11-15-2019, 11:26 PM
Lee Stewart's Avatar
Lee Stewart Lee Stewart is offline
Senior Member
 
Join Date: Mar 2017
Location: ABQ, New Mexico
Posts: 36,633
Thanks: 3,506
Thanked 136,555 Times in 22,784 Posts
Default



The 427 used in the 1966 GT40 MKIIs were not the same as Ford used in it's NASCAR stock cars. Some of the differences were: aluminum heads with smaller intake and exhaust valves, 10.5 CR instead of 12.5 CR (because at LeMans you only got 101 octane gas), aluminum water pump, aluminum hub on the vibration dampener and dry sump oiling system. Horsepower was 485 vs 520. Surprisingly Ford used a standard 780 CFM Holley instead of 4 Webbers.

Last edited by Lee Stewart; 11-15-2019 at 11:29 PM.
Reply With Quote