View Single Post
  #1  
Old 03-21-2019, 02:44 PM
dlv4540 dlv4540 is offline
Yenko Contributing Member
 
Join Date: Apr 2005
Location: Kentucky
Posts: 1,313
Thanks: 0
Thanked 20 Times in 8 Posts
Default 1969-70 396 427 High Performance Parts

ZL1 aluminum tall deck block casting number 3946052 with a date on the backside of 06017 and is a 4.40 standard bore. The block was pressure tested and is ready to build $8,000.

1970 396-375HP 4 bolt block #3969854 dated H-20-9 with CKO code and W in vin for willow run. Block is .030 with two sleeves cleaned, magged and pressure tested and comes with the 11 to 1 pistons and dimple rods, 6223 steel crankshaft .010 under, 3964291 heads dated F-6-9 & F-18-9 cleaned and magged with hardware to rebuild and new oil pan $3750. A couple of the rods are non dimple so will toss in a complete set of 8 dimple rods with this package. Will separate out the heads.


1969 3919840 square port heads dated J-30-8 & J-31-8 with a new set of hardware to rebuild $1350.


Can ship if you cannot pick up and can be reached at 330-770-2517 for any questions or pictures needed.
__________________
Dennis Vugrinovich

Last edited by dlv4540; 06-13-2019 at 09:58 PM. Reason: updated
Reply With Quote
Click here to view all the pictures posted in this thread...