Dave
Most neutralizers will leave a black finish. I have seen a process of soaking a cloth in evaporust and applying the cloth to the surface and leave for 24 hours, you may still need to do some sanding, cleaning to get a good finish. I would try using a brass brush to remove as much of the rust as possible first. Keep in mind, this only needs to last as long until you replace the rotors, depending on the amount of driving that the car will see.
paul
__________________
1971 W30 convert, triple green,second owner.
1971 W30 Convert, special order Rally red, completed
68 Camaro Z28,Corvette Bronze,Houndstooth
2016 Porsche Carerra Cab and 2021 C63S AMG ,modern fun.
www.vancouverclassiccars.com
|