Quote:
Originally Posted by jasonL78
There should be a bolt on the firewall also and you will have to crack or loosen all the bolts on the inner fender to get the fender to move out. Once all the bolts are tightened its now the structure of the front of the car. For now you may be able to put a body shim behind the hood hinge to push it to the pass side if you have room.
|
Thanks. forgot about that bolt. Once that was loosened was able to move the fender over a little bit but of course it then rubs the top of the door edge when it opens. And the hood stills rubs the inner flange of th fender back by the windshield as it passes.
I ordered a set of Goodmark reproduction hinges from rockauto and they should be here this weekend. I have a feeling the 43 year old hinges have a bit too much side-to-side play in them. You can really move the hood laterally quite a ways, when it is articulating.