You won't get the fork out without unbolting the Bellhsg somewhat, you'll be cursing those upper allen bolts now and at future clutch service, the lower 2 are required to clear bellhousing but the uppers can be normal 9/16 head bolts, so you can use a swivel with a 16" 3/8 drive extension. You could use a adjustable ball if you want , that way you can adjust the fork forward to gain floor to fork clearance as long as you maintain some brg to finger clearance, but the 3279000 ball has allways worked before but that was with no block plate. FWIW - a 980-32B is a BFH
Last edited by rszmjt; 04-28-2017 at 09:34 PM.
|