[67 Nova Boy]

I have a Center force and I hate it...In stock ready to go is a Vintage from the 70's 26 spline Schiefer Clutch/Pressure plate and a GM steel lite weight flywheel {16LB} for when the Muncie comes out for an Autogear M23Z.

I will never run a clutch without a Scattershield {Lakewood of course} and block plate. Had a friend that had one let go and it came right through the floor...cut the console in half and grazed his foot. This was in a Buick back in 1978 but I learned it matters to be safe. Parts in the old days were way better made {Stock} then the junk now a days. Don't ever settle, Have your parts checked before you put them in the car...send flywheels to the machine shop to check run out and surface condition when new.

Dave
67 Nova Boy