[Ryan1969Chevelle]

Thanks Kurt, I agree, it will take years to get as brave as you.

Dan:-( Take off eh!!!

My pistons will be forged, rods are forged, crank is Nodular cast iron,

I have a line on a used steel SFI flywheel, clutch fork, and slip yoke....... I hope this works out:-)

Ryan

What does MAW stand for............. Might As Well? well Nick Morocco and I are MAW/mulling over the idea of building an M22Z(3)

The more we research the more it looks like the right way to go.

2.99 first gear, 2.04 second gear, 1.46 third gear, 1 to 1 fourth, with 3.42 rear gears that makes for a perfect 10.2 to 1 final first gear ratio(textbook) with almost a perfectly even drop of 28% to 30% between gears....

Also 55 mph at 2300 rpm, and 75 mph at 3200 rpm.