Re: 1961 Ford Starliner
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Fast67VelleN2O</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">
The purists will cringe at this -- but I had a 67' Vette w/3X2 Holleys on a 427 motor. I took the vacuum secondary parts off (I kept them in a safe place) and converted to mechanical/progressive linkage with parts from Mr. Gasket/Weiand including small hiem joints from various aircraft linkages. "Work good--go long way" ... Not sure if there are any "kits" to do this in this day and age. TAZ [img]<<GRAEMLIN_URL>>/burnout.gif[/img] [img]<<GRAEMLIN_URL>>/burnout.gif[/img] </div></div>
Here is an NOS kit that I have made by Eelco for the 427 Corvette.</div></div>
Matt -- have seen these kits and they work very well ... MUST use Loctite on fasteners. TAZ [img]<<GRAEMLIN_URL>>/beers.gif[/img]
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know!
|