Re: 70 Yenko Electrical Help--PLEASE!!
It has to be the bulbs or the dash printed circuit. sometimes the copper melts and the circuit is open with no current making it to the bulb circuit. The dash plug may not be making contact to the printed circuit. I had no dash lights, i unplugged the connector and pulled printed circuit up flat and lightly used a hair dryer just to flatten the bend from being plugged in all those years. I plugged it back in and have had dash lights ever since, going on two years. Roger
__________________
67 Z28, 67 RS/SS 396 Canadian, 73 Camaro Z28/LT Carolina Blue
|