[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AutoInsane</div><div class="ubbcode-body">Hawk.. thank you for the reply!!!

So take out the #1 spark plug and make sure with a finger over the hole that there is pressure? I will then use a dowel in the hole to determine the exact TDC compression stroke.

I take it that on the distributor you just need to make sure when you have the timing dots set to TDC compression the rotor need to be pointed to the #1 plug position on the cap.. ? And, of course, the plug wires are in proper order on the cap [img]<<GRAEMLIN_URL>>/wink.gif[/img]


</div></div>
You're welcome. Sounds like you've got it. Just be real careful with the dowel in the cylinder.