Re: Refinish AC undressed fibreglass cover
Satin Clear is a good choice. I also had good results using oil based polyurethane a few years ago. (The spare tire carrier on a Corvette.)
I hit the worst areas with 0000 steel wool, then rubbed the matte/satin polyurethane on with a cloth. It soaked in quite a bit in some areas but I went back over those until they were saturated.
Gotta be careful with the steel wool. Those fibers can poke through the wool and put some nasty holes in your fingers!
__________________
Don't mistake education for intelligence. I worked with educated people. I socialize with intelligent people.
|