Re: More Chevelle updates
I'm getting a crash course in clutch tech 101 on this project.
I've had several stick cars before this, but none were anywhere near this power level--maybe 400-ish tops. That said, I've never once performed any sort of "break-in" procedure on a clutch, I've always taken it out and hammered on it...never once had one slip, even a generic parts store unit. I've had a couple that chattered a little, but I've always just chalked that up as being part of the game with a stick.
What threw me with the 2nd disc (the one I just took out) was how it let go when I rolled into it in 1st gear. Even with this power, easing into it from a roll with a 4.56 screw in the back in 1st gear, I wouldn't think it should slip under those circumstances. Maybe if it'd been a somewhat aggressive launch, or hitting it from a roll in 2nd or 3rd I might expect it. Upon removal, seeing how it was only making contact in the center half of the friction surfaces explains to me why it slipped.
FWIW, I didn’t do any break-in with the original Powergrip setup and it held fine. It seems a bit odd that something designed primarily for racing use would require a break-in—I’d imagine most people install them and take them straight to the track.
At any rate, the new clutch is in (and my back is <span style="font-style: italic">out</span>! [img]<<GRAEMLIN_URL>>/frown.gif[/img] ). I still have to mount the shifter and bezel, but that's about it. We're supposed to get another break in the weather later this afternoon, so with any luck (and assuming my back cooperates) I'll try to get the car back out for a bit today.
|