Re: Grandfather's 68 SS Camaro.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JRC99</div><div class="ubbcode-body">Having done a bit of research on the C427X intake (already knew it was a 70's piece, not to mention Motion used them), most people seem to run them with a 780 (or larger) carb. Is a 750 not enough for these? I have heard they flow extremely well. </div></div>
If you're looking for the "Day 2" look....the C427X in a good candidate. If you're fine with the stock look, the factory "163" intake actually works better than the C427X. I believe it was someone on here that did a comparison back in the day and the Edelbrock didn't perform as well as the factory intake.
Kurt
__________________
1969 SS396 Post Sedan Delivered to Van-T Topeka KS
MCACN Day2 Concourse Gold Award
1965 VW El Lobo Dune Buggy built in the mid 70’s for the Iowa Shriners
1968 Schwinn Orange Krate
1969 Schwinn Pea Picker
1968 Schwinn 5-Speed
1970 Schwinn 3-Speed Deluxe
1972 Schwinn 10-Speed Continental
1973 Schwinn 5-Speed Suburban
All Original Paint Bikes
|