Thread: cam shaft specs
View Single Post
  #2  
Old 06-06-2015, 03:41 PM
KenMaisano's Avatar
KenMaisano KenMaisano is offline
Senior Member
 
Join Date: Jun 2013
Location: So .Cal.
Posts: 446
Thanks: 0
Thanked 165 Times in 81 Posts
Default Re: cam shaft specs

Very first thing is to make sure it is Not a Hydraulic camshaft. Put a valve at max lift and gently tap the pushrod area of the rocker arm with a rubber mallet. Then turn the crank just to close the valve and see if the rocker arm is spring loaded. If so go to .000 and a half of turn preload. If it is a Solid Cam set at .020 .020 and you will be fine. My guess is it's a Hydraulic.
Reply With Quote