[Damien]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Woj</div><div class="ubbcode-body">FWIW,

I used a repop master cylinder on a past 69 Chevelle project, bench bled the heck out of it and never got a pedal. Put a rebuilt on in, bench bled and it worked like a champ. There is a chance you might just have a bad MC. Try another from a parts store (they are cheap). Or, maybe your old one if it worked.

Good luck.

Phil Woj. </div></div>

Unfortunately Phil, the nearest parts store for another is about 8,000 miles away. [img]<<GRAEMLIN_URL>>/smile.gif[/img]
I'm going to grease the end of the pin and connect everything back up and see if the pin bottoms out on the master. If not I will put the old master back on and see if that works.