Re: Aluminum intake cleaning/refinishing
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bill Rose</div><div class="ubbcode-body">Lacquer thinner is the best thing I've used. If the intake is off the engine, fill spray gun with the thinner, turn up the air, and spray it down hard. If it's on the engine, I put lacquer thinner on a rag and wipe it down. </div></div>My aluminum intake was blasted clean and then sprayed with clear coat.Now has yellowed a bit.Think lacquer thinner on a rag will clean it up a bit?
|