Another evening at the votech body shop class. I forgot to take any before shots but here are a couple after shots. I had to weld up several 1/2" Ziebart rust proofing holes in the doors. The one on the driver's side was right in the middle of where the conformance decal is supposed to be. The original rustproofers must have drilled right through the decal. DUMB! There were also a couple extra 1/4" size holes where they must have tried to install a non-original replacement, power door lock solenoid. The large hex-head screws are the retaining bolts for the power door lock solenoids.
Anyway, here is the result after I reinstalled the door panels and made sure everything still worked:
