Got the heat riser hoses installed for the Ram Air air cleaner. One of the PerformanceYears.com members, "PB" sent me the correct beveled 455HO plastic elbows and original clamps, as well as the heat stove base plate and 90 degree steel eblow. The corrugated hoses I got from Performance Years for $6 each.
This is sure one Rube-Goldberg contraption once all those hoses are hooked up. No wonder everyone who had one of these cars ripped them out and tossed them in the garbage. It takes two people to remove or install the air cleaner now.
I also discovered that if you don't have the correct "thick" 1/4" carb to intake gasket, the air cleaner heat riser elbow on the drivers side will jam up against the valve cover and will hold up that side up, off the carb.
