Re: firewall grommet
You may be correct Brian. I have never had a 69 with air.
However, the AIM would lead one to believe the hole gets drilled for all models. There are additional instructions for A/C cars, but the AIM says the grommet is part of the harness for all three numbers.
Anyway, I made my own using a 9/16 tapered rubber stopper by drilling a hole, then tapering the end into a cone shape using the bench grinder, a file and some sand paper. Cut a groove in it to make it into a push in grommet. Fits nicely.
I then cut the spade connectors off the brown wires, and made one wire out of it by soldering. Hid the solder connection inside the grommet, and glued it into place so it wouldn't slide out. I am happy with it.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|