I went crawling around the car some more. At least there is some good news: it has two NOS GM quarters, NOS drivers side outer wheelwell and NOS tail panel installed. The labels are still there. That's about $6k worth of GM sheetmetal I don't have to search for. [img]<<GRAEMLIN_URL>>/grin.gif[/img]
And some bad news: the end of the passenger side frame rail is missing the flange that mounts up with the inner tail panel.
Here is the drivers side:
and here is the passenger side:
So far it needs a passenger side frame rail for donor sections, left and right trunk drop offs to replace the home made ones. (I just ordered the new reproduction units that just came out), a passenger side outer wheel house and portions of the inner wheel house.