[XXXGoldL34M20]

All done !!

I cut the factory smog tubes an inch which was the same size as the stainless steel roofing nail and added just a little high heat silicone on the top of the tube for a great seal between the top of the tube and under the nail head.
The pressure of the bolts that were screwed on have them in there real snug with no play at all.

I had no ball bearing kicking around so i used a metal shelf peg to plug the vacuum line which fit just perfectly with a little help of some lubricant.

Smog pump is now Gutted out, Exhaust Manifold Smog Holes are plugged and Vacuum line is closed. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]
Thanks for all the help guys.