[kwhizz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: napa68</div><div class="ubbcode-body">If you care to, a little thinner takes off the printing on the clamps.

The parts you purchased from Ride Tech, is that a stock height coil over or is it lowered Ken?

looks good!

Tim </div></div>


I had two batches of the clamps....the thinner took off the white printing on most of them.....the ones with green printing were stubborn and wouldn't come off........The coil overs are adjustable and I really haven't messedwith them yet!!
Dave is coming over next Saturday to get started on the wiring..........

Ken