Intake Gasket
I am making some changes to my motor (intake/carb). When I removed them the other day, the intake gasket (Fel-Pro 1211)was cut/torn in a few spots.
I believe this was due to the ports on the heads being bigger than the intake so when they compressed together, the gaskets were cut.
Any recommendations on a gasket that will work with my set up, which is ported heads and a non-ported intake?
I really don't want to gasket match the intake if I don't have to.
Thanks, Kurt
__________________
1969 SS396 Post Sedan Delivered to Van-T Topeka KS
MCACN Day2 Concourse Gold Award
1965 VW El Lobo Dune Buggy built in the mid 70’s for the Iowa Shriners
1968 Schwinn Orange Krate
1969 Schwinn Pea Picker
1968 Schwinn 5-Speed
1970 Schwinn 3-Speed Deluxe
1972 Schwinn 10-Speed Continental
1973 Schwinn 5-Speed Suburban
All Original Paint Bikes
|