[XXXGoldL34M20]

That is a great thread you have there Greg.
I see what you mean, the Nova always had the washer behind the rivets and on my chevelle there is no washer behind the rivets.
Maybe other guys here can check and see if there Atlanta built chevelle is done in the same fashion as mine. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

I have a tip for a sagging Wire Gutter unit, i used a heat gun to heat up the plastic and after it softened up a bit i put a weight (Like a heavy flat Book) to sit over the whole unit for awhile.
It is nice and tight again without the plastic sagging down with a large opening on the top keeping the wires in place a lot better.