[napa68]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: napa68</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scuncio</div><div class="ubbcode-body">Cool project. Will be interesting to see how much cutting the Air Ride kit requires. </div></div>

The Air Ride is in!. The tank and compressor are mounted underneath on each side of the fuel tank. This all was installed by the previous owner. He plumbed it with hydraulic hose rather than nylon for durability. I'll take some close up photos tonight or tomorrow. </div></div>

Here are the photos as promised on the Air Ride components.



I posted a couple of pictures of the engine compartment. Would you guys leave it or refinish it? My buddy from Rad Rides was all over me to refinish it. Of course in the next breath he mentions an Art Morrison chassis to me! [img]<<GRAEMLIN_URL>>/sick.gif[/img] Hopefully tomorrow or Tuesday, I am going to set the engine and trans in to see how this all will work with the accessories, manifolds, ECM etc. I can make some decisions from there.