<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">Tape up the inlet with Duct Tape to seal it off and get some Purple Power cleaner and some brushes.......</div></div>
And if that doesn't get it all try some Eagle One brand Chrome & Wire Wheel Cleaner. Same deal; spray it on and scrub with some stiff bristle brushes, then rinse thoroughly with clear water.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">If the stock manifolds fit in the car without without any clearance issues, I'll come over measure and make the exhaust flanges for you......No Problem Mon!!!
Ken </div></div>
Now why doesn't that surprise me? [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] [img]<<GRAEMLIN_URL>>/worship.gif[/img]