[Tommy_Mathison]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: njsteve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tommy_Mathison</div><div class="ubbcode-body">Be VERY careful using this stuff on plated and aluminum parts. It dissolves both. </div></div>

Are you sure you're talking about this stuff because it is not phosphoric acid-based like most of the rust destroyers/converters out there. It is harmless to everything I've come across, other than rust.

I've been playing with stuff for 5 years now and it does not affect anything other than rusted steel and cast iron. In fact I've used it to clean the surface rust off of chrome plated trim parts and cad plated electrical components with amazing results and with no harm to the plated surfaces. </div></div>

I had it strip the plating off a survivor 29295 diverter valve and eat through the aluminum body of an original 40669 AC fuel pump. I saved both parts and can provide photos. It was indeed Safest Rust Remover. I've been using the stuff for years. Pretty amazing stuff.