Re: Ignition Problem
Just a thought..Double check your MSD wiring. I was fighting a issue on a Nascar where it would idle just fine but up to speed under load it would miss, foul plugs etc. After much changing crap etc I come to find out whoever restored the car wired both MSD boxes backwards. There are two wires going from the MSD box to the dist. One had a pink stripe coming from the MSD box ..If you match it up with the pinkish purple wire coming from the dist you have it wired backwards. This will run but under load it pulls 30 degrees timing out of the dist. Read the instructions. If you wire it the common sense way it will be wrong. I have met alot of people that had the same issue. Hopefully that is your problem.
|