View Single Post
  #5  
Old 03-10-2010, 06:18 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default Re: How to mount a "Fly Eye" air cleaner

[ QUOTE ]
I can't tell you how many of those nuts went down carbs in the day ...

the bridge would bend and the nut would come loose and go right down the carb ... IF you are using one loctite it

[/ QUOTE ]

I always checked mine and you're right, the nut did come loose. Never lost one though. That was back when I'd never heard of Loctite. I just used 2 nuts and chinced them together. I've done the same thing since to raise the lid above the base when racing. Simple, as long as you know how to use 2 wrenches at the same time.....
Reply With Quote