Re: how to get plug out of intake?
It will probably take the aluminum threads with it. This is the only way I found to work, Drill a 3/8 hole in the center of the plug then get a jig saw and cut outward toward the threads being very careful not to hit the alum. then take a chisel and hammer and carefully collapse the plug. This will break the bite the two metals have with each other. It works with cast parts also. If you slightly nick the aluminum, sealer will cover it.
__________________
"Knowledge is good" Emil Fabor
67 L/78 Camaro SS/RS H-H,1W,2LGSR,3SL,4K,5BY. (Sold)
70 L/78 Nova M-21,Black Cherry,Sandalwood Int.
09 Pontiac G8 GT Premium,Sport,Roof. Liquid Red.
|