Re: mini-starter and Unilite conversion... HELP!!!!
Real easy.
First, completely eliminate (remove) the wire from the selonoid to the coil.
Then, (if you're using a stock coil with your electronic rconversion) replace the resistor wire with a standard 12ga wire.
The Unilite can then be wired directly to the coil and grounded to the block.
Worked like a charm.
Blair
__________________
1968 L71 Corvette Coupe
1967 L30 Chevelle Malibu
1968 L79 Corvette Convertible (son's)
|