View Single Post
  #9  
Old 02-19-2009, 05:04 AM
jasonL78 jasonL78 is offline
Senior Member
 
Join Date: Mar 2006
Location: New york
Posts: 1,420
Thanks: 4
Thanked 414 Times in 83 Posts
Default Re: 67 chevelle BB motor mount help!

Success the motor and transmission are installed! I took Eric’s advice and made the lower hole on the passenger side frame about a ¼ of an inch lower so all three holes were slotted and the motor mount bolt’s went in with no problem. Thanks Eric.

Ok now onto the next problem I have. The stock cross member don’t line up with the turbo 400 transmission mount. I am sure someone put a turbo 400 in a 66-67 chevelle before? What my father and I are thinking of doing is moving the mounting tab for the transmission mount to the backside of the cross member. I will take some pictures when we finish it. Anyone one have any idea’s?

Second problem but I think I know the answer. My car was a power steering car and I thought I would be able to use a Saginaw pump set up but it hit’s the steering box. On 67 BB cars what does the power steering set up look like anyone have any pictures to share with me? Wasn’t the reservoir on the driver’s side inner fender?

Jason
Reply With Quote