Re: 67 chevelle BB motor mount help!
Jason;
I ran into the same exact problem with the repop frame mounts on my `67 SS. Do you have the pass. side frame mount slid down as low as it will go in the slots on the frame? I have mine in the lowest position and I still wound up having to install washers between the motor mounts & the block to get them to line up with the frame mounts.
You could remove the frame mounts and slot both sides another 1/2" or so and that might be enough to get them to line up.
BTW, a BB engine & trans will not go in together on an early A body even with a stock pan, they have to go in seperately.
Eric
|