Re: 1111480 Distibutors on EBay
Dave,
Can add more data here about these distributors. Uses plastic shims to set the shaft end play. Not good! Does not install an advance bushing on the centershaft and there is usually no grease or felt seal in the lube cavity of the housing. Also replates OEM 201 vacuum advance units but they don't work because the plating tanks blow out the vacuum diaphram. We test them on our Sun machine. NG. Have re-restored some for customers who have opted for a low cost distributor. Bottom line, if one is bought here it still needs to be set up correctly and calibrated.
Jerry
|