[Unreal]

Some d/s valve covers have the bump-out on the inside rear corner and a little flat on the outside rear corner, like the top one in SuperNovaSS's pics.

Other d/s valve covers have the bump-out on the inside rear corner and but do NOT have the little flat outside rear corner, like the one in Kim's pics.

Mine has drippers, has the forward plug wire stand, and is the exact shape of the one in Kim's pics. Mine also has the temp sending wire clip just forward of the third bolt hole on the outside. Can't tell about Kim's.

Until this thread, I was positive mine was correct for 69 L72 Camaro. Can someone confirm?