Some Alternator Help
 

Can anyone tell what's missing or what the problem might be that is causing the alt to be about 1/4 inch out of line with the pump & crank. I cant seem to find a good diagram in my assem manual. Unfortunately I dont remember if this problem existed before I removed the alt. I'm pretty sure I got it back together the way it came apart. It's a 69 alt.

Any ideas!!!!!

It's on a 70 z28

http://i271.photobucket.com/albums/j...P3080111-1.jpg [IMG]http://i271.

http://i271.photobucket.com/albums/j...P3080115-1.jpg

http://i271.photobucket.com/albums/j...P3080117-1.jpg

Thanks

https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: Some Alternator Help
 

Carl
It might be your camera angle,but is that an incorrect thin stamped Alt. pulley you're running?..That or do you have a standout spacer behind your waterpump pulley?
The correct deepgroove W/P pulley is stamped #3976060 and should not have any spacer behind it.
The correct deepgroove machined Alt.pulley is #1970831 and won't have a number stamped on it but it does stand out 1/4" from the fan surface.
Rick

Re: Some Alternator Help
 

The water pump & crank pulley line up perfect, I bet the alt pulley is wrong. If I read correctly you said the correct alt pulley would pull the belt forward 1/4" ??

https://www.yenko.net/ubbthreads/imag...ns/worship.gif https://www.yenko.net/ubbthreads/imag...ns/worship.gif

Re: Some Alternator Help
 

It sits off the fan face about a 1/4".
Here's one for reference on D&R Classics' website,although they didn't come shaded gold from the assembly line back then.
http://www.drclassic.com/catalog/Cam...od/M00228.html

Re: Some Alternator Help
 

Thanks Rick,

Ill try the repop. I have some old alts laying around. I can get an old fan off of one of them. Is the 1100837 fan different or are they all the same?



https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Some Alternator Help
 

Aim for a shark tooth.... EXAMPLE

Re: Some Alternator Help
 

Ill keep my eyes open,

Some one just picked that one off!

https://www.yenko.net/ubbthreads/imag...emlins/eek.gif

Got one https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Some Alternator Help
 

Yeah that seller has a bunch of those w/BIN.
Good for you..and Frank Arone too. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Some Alternator Help
 

I bought a couple of new fans from GM. They aren't quite the same as the original one but don't cost much.

Re: Some Alternator Help
 

Mr 70

If Alt.pulley #1970831 was a original factory item would it be minus the keyway??????



https://www.yenko.net/ubbthreads/imag...lins/smile.gif