A 69 Camaro question
 

------If you have a 69 no-radio Camaro is there anything attached to the bottom side of the radio speaker grill in the dash top??? Is the grate just left open so you can see down thru???.......Bill S

Re: A 69 Camaro question
 

A black heavy cardboard block off is taped to the underside of the speaker grill..BKH

Re: A 69 Camaro question
 

[ QUOTE ]
A black heavy cardboard block off is taped to the underside of the speaker grill..BKH

[/ QUOTE ]

This cover is also used with the four speaker stereo radios and tape players.

Re: A 69 Camaro question
 

------Thanks to both of you for the quick comeback. I was fairly sure something had to go up there..........Bill S

Re: A 69 Camaro question
 

Bill, here's an original cover, with the tape still on it.

http://img.villagephotos.com/p/2002-...eakerCover.JPG


https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: A 69 Camaro question
 

John is it Black through the entire sheet... ie is the center of the paper black or is it grey? And if the center is grey... what about the back?
I am in the paper business and know where to get either one..

Re: A 69 Camaro question
 

Was the image of the Golden Gate Bridge always found on the center longer piece of tape or was that an option! https://www.yenko.net/ubbthreads/imag...ins/tongue.gif








https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: A 69 Camaro question
 

Too bad it wasn't the Virgin Mary... could have sold it for $$$$ on ebay!

Re: A 69 Camaro question
 

[ QUOTE ]
Was the image of the Golden Gate Bridge always found on the center longer piece of tape or was that an option! https://www.yenko.net/ubbthreads/imag...ins/tongue.gif








https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

[/ QUOTE ]

I subliminally saw that, too! How weird? https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: A 69 Camaro question
 

------Hi, John!,,,,Thanks as usual for a bit of your vast knowledge. I went in to the shop today and after doing some other stuff made my own backing and installed it. Came out really good but, of course isnt quite the same dimensionally..........Bill S