The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   BLOCK #3935439...???? (https://www.yenko.net/forum/showthread.php?t=97140)

boxvette 02-17-2008 09:19 PM

BLOCK #3935439...????
 
I WAS CLEANING OUT MY BASEMENT... FOUND AN OLD BLOCK I USED IN ONE OF MY OLD RACE CARS. IT IS A FACTORY 4BOLT WITH THE LG AND SMALL OIL HOLE IN THE SIDE.

boxvette 02-17-2008 11:37 PM

Re: BLOCK #3935439...????
 
does anyone know what this block came in???? date code is A 14 8

Mr70 02-18-2008 12:06 AM

Re: BLOCK #3935439...????
 
Supposedly only available after January 1968 on:
1968 Passenger w/427-425HP.
1968 & 69 Corvette w/427-400-430-435HP.
Most likely it came in the 1968 models,based on it's casting date.

PeteLeathersac 02-18-2008 12:08 AM

Re: BLOCK #3935439...????
 
'68 Vette?
L-88 hopefully!.
Any suffix pad numbers?.
https://www.yenko.net/ubbthreads/imag...ins/3gears.gif
~ Pete

boxvette 02-18-2008 12:19 AM

Re: BLOCK #3935439...????
 
dont know ? no other numbers nothing on the oil filter pad and block was decked flat for racing.. its just a june 14 1968 439 block

boxvette 02-18-2008 12:20 AM

Re: BLOCK #3935439...????
 
also dont know what this carb is... Gm 3869933-EF / List-3130/ 7 5 4 date cde some may of 67 carb i guess

SS427 02-18-2008 01:53 AM

Re: BLOCK #3935439...????
 
I have that listed for the '65 Z-16 396/425. Maybe it was a replacement carb due to the late date. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

HiHorse 02-18-2008 02:43 AM

Re: BLOCK #3935439...????
 
[ QUOTE ]
I WAS CLEANING OUT MY BASEMENT... FOUND AN OLD BLOCK I USED IN ONE OF MY OLD RACE CARS. IT IS A FACTORY 4BOLT WITH THE LG AND SMALL OIL HOLE IN THE SIDE.

[/ QUOTE ]
Came in vette L71,L88,L89 also in impala L72

John Brown 02-18-2008 08:13 AM

Re: BLOCK #3935439...????
 
1 Attachment(s)
[ QUOTE ]
also dont know what this carb is... Gm 3869933-EF / List-3130/ 7 5 4 date cde some may of 67 carb i guess

[/ QUOTE ]

3130 was the number used on 65 396/425 horse full size cars. It originally came with dual inlets and pent roof float bowls with the tiny inlets just like the 3124 on Corvettes and the 3310 on Z16 engines. Those bowls may have been dropped by 1967 though.

https://www.yenko.net/attachments/320060-Real3310B.jpg

This is Eric's pic of an original 3310, but the bowls would be the same. Thanks Eric. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

boxvette 02-18-2008 08:56 AM

Re: BLOCK #3935439...????
 
thanks/ guess i will clean it up and put in away for another 25 yrs


All times are GMT. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.