RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

I bought this a few years ago...and I had a book that had pics of it and described what it is...but I cant find it...

Apparently it is a GM Pontiac Xram intake that was made for the 1970 Trans Am cars, for the tall deck 303?? motors...supposedly they only made a handful...

I also got alum. spacers about 1 inch thich...I believe so one could make this work with the standard block...but dont quote me...

Can anyone help??? Im sure there must be a Pontiac site??

Thanks!!!

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.??? *DELETED*
 

Post deleted by iluv69s

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

the part number

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

other part number

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

sorry about deleting the other post...here is the actual bottom of this intake...It is much more hi-rise than the Chevy 302 intake.... dont know if you can tell by the pics...

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

That is definatley a rare piece... Wow... Performance Years Pontiac Forum is the pontiac forum...

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

From "Pontiac Musclecar Performance 1955-1979" That intake was made for Trans-Am racing, 303 RAIV, but Trams-Am sanctioning body decreed single four barrel carburation for 1970. Buck Baker did well with that manifold in NASCAR's Baby Grand circuit. Very cool piece for a Pontiac collector.

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

THATS SUPER COOL!!!!!!!!!!

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

Thats the book i have but can't find...Thanks alot for all your help...

BTW the intake is now on Ebay...although I will post another thread. Thanks again

Re: RARE PONTIAC CROSSRAM...W/PICS....ANY INFO.???
 

the only real rub with the intake is it takes a special tall dist to clear the intake.There is a pic also in Petes book that shows the dist.It looks very close to a chevy tach drive dist.It was used with the RA IV and RA V X rams.The intake was made for the short deck 303 SCCA blocks.Im told there was only about 6 of each of the RA IVs and RA V 2-4 X ram intakes made.Very nice piece,I sold one a few years ago that went to canada.Not sure how the IV intake ran but do know the V intake did not run well.Tom