Exhaust clamps
 

I just recieved the correct clamps for my 68 Z. It there anything they can be coated in so they will not rust?

Re: Exhaust clamps
 

I highly recommend using this. BoeShield
You can now buy it at SEARS or Burlands House Of Tools over here.
Click their webpage at the bottom to find your local dealer.

Re: Exhaust clamps
 

How does it take the heat from the exhaust?

Re: Exhaust clamps
 

It does not seem to be a factor at all with mine.

Re: Exhaust clamps
 

Thanks i will look for it up here in Ontario. Sounds like what I need to keep them in good shape.

Re: Exhaust clamps
 

This past July, I put a new Gardner exhaust system on my '69Z and treated it with Boeshield. In August, I drove the car to a local show in a neighboring town about 20 miles from my home. On the way back, I got caught in an unexpected rain shower. A week or so later, I gathered up enough courage to put the car on a lift and take a look. Although there was light surface rust on all the unpainted suspension parts, there was absolutely no rust on the exhaust. I am a believer!

Re: Exhaust clamps
 

Rick, Are not the GARDNER Exhaust pipes fabricated from Aluminized Tubing, where as rust in the short term would not be a problem anyway......

Below is Jack Seymours GARDNER system below........

http://img.photobucket.com/albums/v4.../119772377.jpg

Re: Exhaust clamps
 

http://www.boatersworld.com/product/179450028.htm

Boeshield Source.............

Re: Exhaust clamps
 

Boeshield will not hold up on the exhaust manifold bolts, but that's a much higher heat range than the rest of the exhaust system.

Unless you have the bare steel clamps/hangers, it shouldnt really need anything.