Updates
 

For anyone who is interested, I've made several updates to my website, including the pricing section, FAQ's and the specials page. Please be sure to read everything carefully and thoroughly.

Thanks.
Eric

Re: Updates
 

I just came in from following your write-up on setting a 4053 Holley. Damm car runs great now. The car was always smelling rich but much better after following your instructions, What makes the carb leaner,in or out on the mixture screws?

Re: Updates
 

I printed the tuning guide and stuck it in my "clue" binder of useful information out in the garage.

Re: Updates
 

On a conventional 4150/4160 style Holley, turning the mixture screws in leans out the idle mixture, backing them out richens it.

Eric

Re: Updates
 

Thank-you again

Re: Updates
 

Glad to be of help.
Eric

Re: Updates
 

[ QUOTE ]
For anyone who is interested, I've made several updates to my website, including the pricing section, FAQ's and the specials page. Please be sure to read everything carefully and thoroughly.

Thanks.
Eric

[/ QUOTE ]

Looks great Eric! https://www.yenko.net/ubbthreads/imag...lins/beers.gif