69 Camaro cowl induction switch and throttle arm
 

Guys,

From a visual standpoint, how close is the reproduction throttle arm and cowl induction switch compared to the GM parts for a 69 BB Camaro. Is it close, way off, or something totally different?

And has anyone had first hand experience with using the reproduction switch and throttle arm?

All comments welcome.

Thanks,javascript:void(0)
https://www.yenko.net/ubbthreads/imag...ns/worship.gif

Elon

Re: 69 Camaro cowl induction switch and throttle arm
 

Not sure about all the differences, but the biggest difference I saw (I have one of each) is that the bolt in the bottom is welded in place on the repop, but not on the original.
Hope this helps.

Lynn

Lynn

Re: 69 Camaro cowl induction switch and throttle a
 

I used a repop throttle arm, switch and spring clip. It was a tight fit, and when I tried to force it the switch exploded. I filed the hole a little bigger, and everything went together fine. (D&R replaced the switch for me) I don't know which of the pieces was the culprit.

Re: 69 Camaro cowl induction switch and throttle a
 

I appreciate the replies.