1968 z28 fan blade
 

Anyone have a picture of the correct 5 blade 4 rivet fan blade that was factory on a 68 Z

Re: 1968 z28 fan blade
 

Here you go. https://www.yenko.net/attachments/286114-P1010001.JPG

Re: 1968 z28 fan blade
 

Thanks that is the one that was in the trunk of my z when I bought the car and the engine had a flex fan on it. Nice to know I have the correct one.

Re: 1968 z28 fan blade
 

Check the hole diameter to make sure it is 2 5/8 inches. There is another fan that looks identical to this in 68 also a 4 rivit but has a smaller hole diameter and not correct for the Z.

Re: 1968 z28 fan blade
 

I will measure it when I get home,never knew that.

Re: 1968 z28 fan blade
 

size...3 1/4" bolt spacing https://www.yenko.net/attachments/286214-P1010006.JPG

Re: 1968 z28 fan blade
 

Don't mean to change the subject here but I have always wondered why the spacing on factory fan blades is not even.
James

Re: 1968 z28 fan blade
 

OK, so who taught Charlie how to use a ruler? Figuring out that measurement involves higher math!

Re: 1968 z28 fan blade
 

LOL...Bigchevydaddy...The ruler was to show distance from bolt centers.

Re: 1968 z28 fan blade
 

Miss South Carolina couldn't have answered that any better.
Such as..