nos 70 camaro rad support
 

a rad support NOS gm 1970 camaro 400.00

Re: nos 70 camaro rad support
 

375.00 firm before ebay

Re: nos 70 camaro rad support
 

Chuck,
Large opening or small? If large opening I am interested.

Can you send me a picture?

Rick H.

Re: nos 70 camaro rad support
 

Rick, I was thinking to ask same question, but figured it would be the small.
You and I have got to be two of the very few 2nd Gen'rs
on this site that would ask that question
Do you have knowledge or experience in enlargening the opening. Is it as simple as keeping the edge straight and clean ????????

Re: nos 70 camaro rad support
 

Chuck S.

I think you could trace out the opening and use a nibbler or a sabresaw. Carefully of course. I might buy it just to have it.

My survivor car with A/C has a mint rad support in it and I would use it as a pattern

Chuck H. Please let me know what the rad support looks like and I am very interested in it.

Thanks
Rick H.

Re: nos 70 camaro rad support
 

Im going to go on the assumption i have the one you dont want,until i can look at it. This is more than likely the later one rather than the early one,and im assuming thats the difference in the holes?

Re: nos 70 camaro rad support
 

I am assuming the large hole is for a big block ?

Re: nos 70 camaro rad support
 

If that is the case i will have to look to be 100% sure.

Re: nos 70 camaro rad support
 

Chuck S., did the Z-28 and other small blocks with Air Conditioning get the larger opening support. My 70Z has the wider radiatior although it was a 2 core from the factory. I believe Big Blocks used the same width but with 3 or 4 core thickness. Thanks,

Paul

Re: nos 70 camaro rad support
 

[ QUOTE ]
I am assuming the large hole is for a big block ?

[/ QUOTE ]

No. The larger opening is for any Camaro that was optioned with the VO1 radiator. The Z/28 got the larger radiator automatically. A six cylinder or any of the small blocks with A/C would get the large opening as well. A big block if so ordered with VO1 would get the larger opening as well.

The larger opening was just to let more air flow for the larger radiator.

My survivor with a 307 and A/C has the large opening radiator.

Chuck H, I am still very interested in the rad support. Large or small opening, still interested.

Rick H.